ABOUT

Plastic is a global problem and we can all become part of the solution.

Ro Plastic Prize wishes to unite the design community in the challenge to move beyond plastic pollution as we know it today and to promote the next generation of design. Plastic was invented in the late 1800’s, finding use in technical applications, such as warfare, in the 1930’s. In the 1950ies it became widespread in consumer products and packaging. Since it’s invention, over 8 billion metric tons have been globally produced and more than 50% has been discarded or incinerated. This number is constantly growing: over 322 million metric tons are produced each year, and 8 million metric tons end up in our oceans. This is threatening the health of the marine ecosystems and sea-life. All plastic that is not properly disposed of is toxic in nature, not only at sea but on land. We need to embrace the power of design and acknowledge the impact it can have. Today plastic trash is the biggest resource available. While researchers are constantly developing biodegradable polymers, what can be done to lessen the burden of oil-based plastics on the ecosystems? The invention of this class of materials was revolutionary and still today polymers are essential in many industries and goods.
Re-using, recycling and reinventing are the challenges that this prize wishes to bring to the global design community. When transformed, plastic can become a resource with vast possibilities and potentials.

ANNOUNCING THE INTERNATIONAL PRIZE

Rossana Orlandi Srl is launching the 1st edition of Ro Plastic Prize to challenge and inspire the design community to think differently about how our things are made. The best projects will be presented as finalists at Rossana Orlandi Gallery during the Fuorisalone of the 2019 Salone Internazionale del Mobile in Milan. A jury of professionals and experts will select four winners among the finalists, one for each category, who will each receive a prize of 10.000€.
Requirements

REQUIREMENTS

WHO

The Prize is open to designers from all countries, backgrounds, curriculums and ages. For minors, consent from a legal guardian is required.

HOW

Projects in Categories 1 & 2 (see below) must be submitted as Prototypes. Sketches and drawings can accompany the Prototype to further illustrate it. Each Prototype must be made out of recycled plastic and be in turn, entirely recyclable. Prototypes may have minor elements made of non-recyclable plastic and/or other materials, provided that such non-recyclable parts can be easily removed in order to make the Prototype wholly recyclable. Categories 3 & 4 can be written presentations and renderings.

APPLY

In order to participate, designers are requested to read, accept, complete and sign the “Terms and Conditions” – including all the required information describing their projects in detail – and the following related “Subscription form” (see below). Applications must be submitted in English.

SUBMIT

Applicants can share up to ten videos and/or images to accompany their entry, including clips (no more than 3’ each) to explain the idea or the project itself. A cover and a personal portrait are required. The limit for each photo is 1MB and the videos should be submitted through a link to a YouTube or Vimeo channel.

EVALUATION

Each submission will be evaluated with the following four parameters: functionality, form, innovation, and environmental impact.

Prize Categories

PRIZE CATEGORIES

1. DESIGN

Context:
Design is a process before it becomes a product. We know that linear systems are no longer sustainable, especially with the advent and widespread use of synthetic and composite materials. Circular Economy seems to be the only compatible way to contrast the high demand of limited resources for a growing population. Our generational goal is to mimic nature’s cycles of birth, growth, death and regeneration – which in the life of our things means conception, product development, production, distribution, use, disposal and regeneration. In one word: better design. Low cost objects are designed to have a short lifespan, and this has altered the way we perceive much of what we use. The temptation to have new things has replaced our affection towards them. In the past decade plastic has gone from the material of choice to a critical, harmful ingredient. On the other hand, in the collective imagination, recycled plastic is poor, ugly and second rate. In one word, it’s waste, and so it should remain. In reality, it is an abundant resource and the challenge is to engineer it into materials and products that are beautiful, functional and ecological. Good design is the best way to reverse consumers’ approach to recycled goods. It can be done.

Challenge:
The Prize wants to bring recycled plastic into our daily lives, in the things we use at home and outdoors, in both private and public spaces. Plastic is an extraordinary class of materials with infinite potential to be used and re-used. Only 2% of recycled plastic becomes something new. How can we engage the design community to prefer this abundant resource to virgin plastic?

2. HOME TEXTILES

Context:
Second to oil, the clothing and textile industry is the largest polluter in the world. Safety regulations can make chemical additives an unfortunate necessity, with the unwanted consequence of hindering recycling and re-use of these materials. The amount of textile waste, both pre- and post-consumer is constantly growing each year, with numbers reaching billions of tons – representing 20% of global production waste. The biggest hurdle to overcome, in our collective consciousness, is the notion that sustainable textiles are less attractive and performing compared to conventional ones. Just like in the fashion industry, low-cost home furnishings that are mass-produced have become mainstream and the urge to replace what could be fixed or renewed has become commonplace. Textiles used indoors contribute more than people understand to our well-being, yet, while we’re not prepared to compromise on style, we do, inadvertently choose furnishings that are hazardous both to us and the environment. For carpets alone, in Europe, approximately 1.6 million tons of post-consumer carpet material is discarded annually, 60% ends up in landfills, 38% is incinerated and only 2% is recycled. How can we produce textiles that are beautiful, functional, healthy and can be re-used?

Challenge:
To design synthetic recycled textiles without added glues or hazardous chemicals.
To reduce the level of toxicity, while meeting and complying with safety standards and regulations.
To enable the recycling and re-use of the material without compromising quality.

3. PACKAGING SOLUTIONS

Context:
Single-use retail packaging waste is growing at an alarming rate and poses a big challenge to the design community. With modern consumption patterns shifting from physical to online retail, and goods being shipped globally, the logistics and material footprint of packaging have drastically increased in complexity. Goods go through many phases of packing and unpacking before they reach the hands of the final consumer. Huge amounts of waste are generated throughout the supply chains, from manufacturers, distribution centers, digital inventories and local logistic delivery systems. Retail packaging is made up of mostly non-degradable high-performance polymers or composite fused materials, laminated with organic fiber and thin metal films, to pass mechanical drop tests, food safety and environmental resistance standards. The most important function of retail packaging is to protect the product from contamination, water damage and impact during transport. Simply labeling things “degradable or recyclable” to make consumers feel less guilty about their convenience-based behavior is just marketing. Everything is degradable sooner or later but the time frame is crucial.

Challenge:
Single material retail packaging design that can be fully recycled or fully degradable.
Packaging designed for multiple lives: adaptable to different sizes/product categories, extending the use from inventory to store, store to display, display to consumer, transport to warehouse or store, to the consumer, and finally to recycling bins.

4. CONSCIOUS INNOVATION PROJECTS

Context:
Social responsibility is a crucial element of innovation. We need more respect and awareness, in regards to who makes our things and their working conditions, how production standards affect local communities and the environmental impact of mass distribution. Everything comes to us with a story, which often remains untold, therefore consumers unknowingly contribute to an anonymous collective act of degradation. Transparency and accountability are key ingredients to bring consumers on board and making them collaborative agents of change. In this frame of mind, re-using and recycling become the norm, resulting in new processes, materials, supply chains and narratives.

Challenge:
The Prize will be awarded to people and organizations committed to experiment, innovate, invent. The value of the projects is not only in the final outcome, but in the process itself.

Jury

JURY

The Jury is represented by a team of international experts, with diverse skills and specializations, qualified to evaluate the different types of projects. In addition, there will also be a technical commission to evaluate whether each project meets the requirements.

When

WHEN

SUBMISSION DEADLINE

Designers can submit their projects and prototypes from December 6th to March 10th, 2019.

TIMELINE

DECEMBER 6th, 2018
Prize announcement

MARCH 10th, 2019
Submission deadline

MARCH 18th, 2019
Communication of selected finalists

APRIL 1st, 2019
Submission deadline for prototypes

APRIL 7th, 2019
The Jury meets

APRIL 10th, 2019
Prize event

APPLY NOW

Entries are now closed…Thank you to all applicants and Good Luck!

MEDIA PARTNER